Double-Entry

HW Series
Double suction design for large capacity
HW
Product Features:

1. A wide range of transmission medium, with allowable certain amount of impurity in the medium;
2. Double layers of structure design, with comprehensive heating and thermal insulation for medium, as well as sufficient and rapid heating;
3. A variety of bearing cooling modes available, with better protection of bearing and prolonged service life;
4. Optimized structure design, with allowable short period of dry operation (≤2min);
5. Extremely powerful self-priming capability and lower NPSHr value, and conveying a certain proportion of air-liquid mixed flow is achieved.
6. A variety of bearing cooling modes available, with better protection of bearing and prolonged service life;

Performance
Viscosity
2.0~100000 mm2/s
Flow
10~1500 m3/min
Maximum Pressure
2.5 Mpa
Maximum Temperature
180 ℃
 


HM Series
Suitable for medium/high pressure heavy load pump
HM
Product Features:

1. Wide range of transmission medium, with allowable certain amount of impurity in the medium;
2. Integrated design for screw and threaded sleeve improves the rigidity and flex resistance, with stable and reliable running;
3. A variety of bearing cooling modes available, with better protection of bearing and prolonged service life;
4. Optimized structure design, with allowable short period of dry operation;
5. Extremely powerful self priming capability and lower NPSHr value, and conveying a certain proportion of air-liquid mixed flow is achieved.
6. A variety of bearing cooling modes available, with better protection of bearing and prolonged service life;

Performance
Viscosity
2.0~100000 mm2/s
Flow
0~300 m3/h
Maximum Pressure
6.3 Mpa
Maximum Temperature
180 ℃
 


HQX Series
Multiphase transfer pump with China\'s leading technology
HQX
Product Features:

1.Stable performance: not sensitive to the influence from gas content and medium fluid

2. Excellent rigidity: no vibration caused by gas compressing

3.Strong boosting: able to handle various pressure ratio condition

4.Excellent abrasive resistance: screw surface hardness reach to HV1200

5. Reliable sealing: in compliance with API682 standard.

Performance
Viscosity
0.5-1500 mm2/s
Flow
20-150 m3/h
Maximum Pressure
6.3 Mpa
Maximum Temperature
-20-120 ℃